Pool Table Repair & Refelting Melbourne

The process of replacing your pool table’s felt or its tablecloth, more accurately, is one which is usually left for the experts to deal with. However, the tools required for the said process are neither difficult to use nor are they expensive. Whether it’s some dust on your table or even a little stretch of the felt in an incorrect direction, this can make your table’s playing surface rather unpredictable or bumpy. However, pool table repair melbourne can be done effectively by working carefully and patiently. It would be worth your while to have an assistant who would stretch the cloth while you’re fastening it.

Steps to Re-felt a Pool Table:

Follow these steps to re-felt a pool table yourself

Step 1: Disassemble your Pool Table:

The first step in felting a pool table is to disassemble the table. Begin by removing the bolts and pocket liners that keep the rails fixed to their positions carefully. These can easily be seen underneath your table. Exclusion of the rails is a crucial step part. Basically, different kinds of pool tables have different kinds of rails. You can find one, two or even four rails under.

Step 2: Remove the Old Felt:

Even though pool tables melbourne are made out of materials which are long-lasting but this isn’t true for the felt. You’ll need to replace it once it’s worn out. Felt can wear out because of friction, accumulation of pool chalk on the felt, due to the rebounding effect of balls etc.

There are two ways to remove the felt.

See also  The Importance of Hiring Medical Cleaning Services

·         Glue:

If glue has been used to attach the felt to your table, you can simply remove it by tearing it off. However, while doing so, pieces of glue might stay behind on your table, and that can be scraped off making sure you don’t destroy the table in the process.

·         Staples:

Staples are also used to attach felt to your table. You can easily remove them by the using a staple remover.

Step 3: Clean the Slate:

Pool tables are made out of slate. This is almost like a permanent material that can last for very long. Therefore, pool tables are usually an expenditure that happens just once. While pool table repair is being done, it is suggested to clean the slate once the worn out felt has been removed. A dry cloth can be used for removal of dust. However, one must avoid using dusting sprays or wet cloth since this will soften or moisten the slate.

Step 4: Measurement:

Next, you’ll need to measure the dimensions of the pool table by the help of a measuring tape. It’s better to buy a few extra inches since it’ll be handy. Once the measurements have been taken, you can go buy the felt at some sports shops. Felt is available in many colors so if you wish to change its color, now is your chance.

Step 5: Cut the Felt:

Lay the felt on your second hand pool table and let it settle. Sweep your fingers on the felt so as to feel any roughness or bumps underneath. The felt must feel smooth. Next, use a pair of scissors to cut the felt conferring to the accurate measurement of your table. It’s better to leave out a good amount of felt after cutting so that it can be used for the rails.

See also  The Benefits of Invisalign

Step 6: Staple the Felt:

This is where people look for experts. However, it certainly is doable by you at home.

Step 7: Glue the Surface:

Glue is then applied to the slate directly. If you go for the glue because your pool table doesn’t have a layered-board, begin with cleaning the surface using a dry and clean cloth. Then apply glue and attach the felt smoothly over it. Next, stretch your felt and cut its edges so as to apply glue in small portions.

Conclusion:

You can enjoy playing your game only once all its elements are up to the best standards. If your table’s felt is old or worn out, it might slow your game and lose its charm. Pool table repair never seemed to be so easy!

Pool Table Repair Melbourne